Changes between Version 38 and Version 39 of Processing/LidarCalibrationProcedure


Ignore:
Timestamp:
Apr 3, 2014 2:14:40 PM (5 years ago)
Author:
emca
Comment:

--

Legend:

Unmodified
Added
Removed
Modified
  • Processing/LidarCalibrationProcedure

    v38 v39  
    212212When the calibration has been completed and accepted, copy the reg files for each stage and the attune project files onto the Linux systems for backup. The final reg file should be copied to the arsf calibration repository and noted at the bottom of the wiki [wiki:Processing/LeicaProcedure here].
    213213
     214Create a calibration config file for use with alsproc. Use the template in /users/rsg/arsf/calibration/lidar/alsproc_cal_template.cfgr and fill in all the values marked XXXX. Save this in the same folder as the reg file above.
     215
    214216The final step is to update the data quality report with the details of the calibration. Currently the data quality reports are stored at ~arsf/document_in_svn/data_quality_reports/lidar. The most important section is the Data Accuracy - for this you will need the lascontrol output from the Range Correction (step 4 above). Any other significant information relating to the calibration should also be added to the report.
    215217