Changes between Version 8 and Version 9 of Processing/Lidarqcprocedure

Timestamp:

Aug 13, 2009, 4:09:45 PM (15 years ago)

Author:

knpa

Comment:

--

Processing/Lidarqcprocedure

@@ -32 +32 @@
 === Check overlap of neighbouring lines ===
 
-The first thing to do here is to load up all lines into a viewer (or if runs out of memory load them up in pairs) and see how well they overlap in the horizontal plane. The Fugro viewer is probably best for this because it also allows Shapefiles to be read in. Check along features that cross between flight lines, for example, roads/field boundaries/hedgerows do they continue unbroken or are they offset between flight lines. Also, compare against the vectors (if available) for any gross offsets.
+The first thing to do here is to load up all lines into a viewer (or if runs out of memory load them up in pairs) and see how well they overlap in the horizontal plane. The Fugro viewer is probably best for this because it also allows Shapefiles to be read in (though you can also just use Terrascan with "Colour by intensity").
+Check along features that cross between flight lines, for example, roads/field boundaries/hedgerows do they continue unbroken or are they offset between flight lines. Also, compare against the vectors (if available) for any gross offsets.
 
 The elevation between neighbouring flight lines must be checked too.  This can be done in various ways: