Changes between Version 7 and Version 8 of Processing/Procedures/AlsprocAutoPitchRoll


Ignore:
Timestamp:
Aug 14, 2015, 11:44:02 AM (9 years ago)
Author:
dac
Comment:

--

Legend:

Unmodified
Added
Removed
Modified
  • Processing/Procedures/AlsprocAutoPitchRoll

    v7 v8  
    55If you are using this to process data after day 2014/238 you need to use the calibration file '/users/rsg/arsf/calibration/2014/lidar/20140826/2014_238_calibration_no_fla.reg' in ALSPP, as this doesn't have a FLA correction so ''should'' produce the same values as alsproc - check this though.
    66
    7 The general procedure is similar to that of alsproc, for which there is a guide [wiki:Procedures/AlsprocProcessing here].
    8 
    9 A couple of changes are required to the config file:
     7The general procedure is similar to that of alsproc, for which there is a guide [wiki:Procedures/AlsprocProcessing here]. You need to generate a config file following the procedure on this page, add the projection (as detailed) and then make the following changes for calc_roll_offsets.py:
    108
    119* Set start, end and increment values for pitch / roll / heading.