Changes between Version 1 and Version 2 of Processing/SRTMDEMs


Ignore:
Timestamp:
Jan 28, 2008, 4:46:50 PM (17 years ago)
Author:
benj
Comment:

--

Legend:

Unmodified
Added
Removed
Modified
  • Processing/SRTMDEMs

    v1 v2  
    16165. Quit Grass and then start it up again. Select a location using UTM projection for the target area or create one if none is available - make sure you've got the right UTM zone. Note you can also use whatever other projection you want, but this guide assumes you want UTM.
    1717
    18 6. Use the conversion spreadsheet (see [http://www.uwgb.edu/dutchs/UsefulData/UTMFormulas.HTM#Spreadsheet http://www.uwgb.edu/dutchs/UsefulData/UTMFormulas.HTM#Spreadsheet] to determine the boundaries of the target flight in meters within the selected UTM zone. If the flight spans two or more UTM zones, you will have to calculate the offsets appropriate to work out the east and west boundaries of the area. eg. If western boundary is zone 32 and eastern boundary is zone 33, for eastern value use zone 32, add 750000 to value from spreadsheet
     186. Use a conversion utility (eg see the spreadsheet at [http://www.uwgb.edu/dutchs/UsefulData/UTMFormulas.HTM#Spreadsheet http://www.uwgb.edu/dutchs/UsefulData/UTMFormulas.HTM#Spreadsheet] to determine the boundaries of the target flight in meters within the selected UTM zone. If the flight spans two or more UTM zones, you will have to calculate the offsets appropriate to work out the east and west boundaries of the area. eg. If western boundary is zone 32 and eastern boundary is zone 33, for eastern value use zone 32, add 750000 to value from spreadsheet
    1919to find eastings relative to zone 32 bound.
    2020