Changes between Version 20 and Version 21 of Processing/SRTMDEMs

Timestamp:

Feb 16, 2011, 4:18:07 PM (14 years ago)

Author:

knpa

Comment:

--

Processing/SRTMDEMs

@@ -129 +129 @@
 }}}
 
-10. To output an ASCII DEM from the converted map, the instructions are the same as [wiki:Processing/NextMapDEMs those on the NextMap page]. Follow the instructions from about half-way down. Make sure to covert your DEM to an az-style header.
+7. To output an ASCII DEM from the converted map, the instructions are the same as [wiki:Processing/NextMapDEMs those on the NextMap page]. Follow the instructions from about half-way down. Make sure to covert your DEM to an az-style header.
 
-11. To elevate the SRTM/ASTER DEM to the WGS84 spheroid (as is required for LiDAR deliveries and LiDAR DEM patching) see [wiki:Processing/DEM2WGS84 Elevate an SRTM/ASTER DEM to the WGS84 spheroid].
+8. To elevate the SRTM/ASTER DEM to the WGS84 spheroid (as is required for LiDAR deliveries and LiDAR DEM patching) see [wiki:Processing/DEM2WGS84 Elevate an SRTM/ASTER DEM to the WGS84 spheroid].
 
-12. When your DEM is finished, place it in ~arsf/dems and link it from within the individual projects. Make sure it's origin is contained in the file name e.g. <PROJECT_NAME>-ASTER.dem.
+9. When your DEM is finished, place it in ~arsf/dems and link it from within the individual projects. Make sure it's origin is contained in the file name e.g. <PROJECT_NAME>-ASTER.dem.