Changes between Version 3 and Version 4 of Processing/aplguiquickstart


Ignore:
Timestamp:
Feb 8, 2012, 5:37:43 PM (12 years ago)
Author:
jaho
Comment:

--

Legend:

Unmodified
Added
Removed
Modified

  • Processing/aplguiquickstart

    v3 v4  
    4545Now that you have an IGM file in the required projection it is time to map the level-1 data to a regular grid. You can use the third panel of AplGUI to create a map of level-1 data using projection of the IGM file.
    4646
    47 [[Image(http://arsf-dan.nerc.ac.uk/trac/raw-attachment/wiki/Processing/aplguiquickstart/snapshot5.png)]]
     47[[Image(http://arsf-dan.nerc.ac.uk/trac/raw-attachment/wiki/Processing/aplguiquickstart/snapshot6.png)]]
    4848
    4949First select an IGM file produced with either first or the second panel of AplGUI, depending on the projection. Then select the corresponding level-1 file. Finally specify the name for the mapped output file. You will also have to select the bands to be mapped and the pixel size in relevant units, again based on the projection used. Optionally you can adjust some of the advanced settings, like output data type interpolation method or specify a particular are to be mapped.
    5050
    51 [[Image(http://arsf-dan.nerc.ac.uk/trac/raw-attachment/wiki/Processing/aplguiquickstart/snapshot6.png)]]
     51[[Image(http://arsf-dan.nerc.ac.uk/trac/raw-attachment/wiki/Processing/aplguiquickstart/snapshot5.png)]]
    5252
    5353Once you are happy with the settings press Run button to create the mapped level-3 file.