Changes between Version 3 and Version 4 of Processing/ipas_imu

Timestamp:

Jul 25, 2022, 4:14:59 PM (2 years ago)

Author:

wja

Comment:

--

Processing/ipas_imu

@@ -86 +86 @@
 
 
+
+'''IPAS TC'''
+
+On Windows VM active on pmp1784 in `~wja/scratch_local/pmpc1483vm10`
+
+New project
+
+Load in the raw navigation data
+
+In the `Setup GNSS Base Station` window, have the `Use Differntial GNSS` butting ticked and click `Add Base Station`.
+
+Load in `*.gpb` file of basestation.
+
+In the `Setup GNSS Base Station` window, have the `Use Differntial GNSS` button ticked and click `Add Base Station`.
+
+It should read the info from the file and allow you to execute the processing. At the start of the processing it should suggest that you interpolate the basestation data (which should have an interval of 30 seconds) to 1 second. Accept this, create the interpolated data and then run the processing.
+
+If, when you input the basestation `*.gpb` file, everything is greyed out and the informaton has not been read properly from the basestation, click on the `Advanced` tab and interpolate the  data
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+'''The following notes are just for reference. I don't think GrafNav works anymore'''
+
 '''GrafNav'''
 
@@ -117 +151 @@
 
 Go to Settings > PPP. On the precise tab download precise clock and ephemeris '''Note it only recognises the time format of MM/DD/YYYY for the date range'''
-
-'''IPAS TC'''
-
-On Windows VM active on pmp1784 in `~wja/scratch_local/pmpc1483vm10`
-
-New project
-
-Load in the raw navigation data
-
-In the `Setup GNSS Base Station` window, have the `Use Differntial GNSS` butting ticked and click `Add Base Station`.
-
-Load in `*.gpb` file of basestation.
-
-It should read the info from the file and allow you to execute the processing. At the start of the processing it should suggest that you interpolate the basestation data (which should have an interval of 30 seconds) to 1 second. Accept this, create the interpolated data and then run the processing.
-
-If, when you input the basestation `*.gpb` file, everything is greyed out and the informaton has not been read properly from the basestation, click on the `Advanced` tab and interpolate the  data