Changes between Version 11 and Version 12 of Sensors/LeicaLIDAR/MashUp


Ignore:
Timestamp:
Oct 22, 2008, 12:30:33 PM (15 years ago)
Author:
mark1
Comment:

--

Legend:

Unmodified
Added
Removed
Modified
  • Sensors/LeicaLIDAR/MashUp

    v11 v12  
    421421
    422422
     423
    423424   * Image observation Weights 0.2, 0.2, 0.1
    424425   * Atmosphere same parameters as in the ALSPP processing
     
    449450
    450451=== ''HINTS'' ===
    451 It may be useful (proved so in calibration site of little rissington) to copy the PNGs generated by Attune and draw onto them. Use a noticeable colour (e.g. red) and draw straight lines along features which will not change (negligably) between images. For example, draw along field boundaries into, and over, the roads or along runways from the centre of the white cross to the centre of the cross at the other end of the runway. Also draw along road edges at junctions to create crosses where you can select the centre as a tie point. Doing this on each image will allow much better precision of selecting tie points.
     452It may be useful (proved so in calibration site of little rissington) to copy the PNGs generated by Attune and draw onto them. Use a noticeable colour (e.g. red) and draw straight lines along features which will not change (or only negligably) between images. For example, draw along field boundaries into, and over, the roads or along runways from the centre of the white cross to the centre of the cross at the other end of the runway. Also draw along road edges at junctions to create crosses where you can select the centre as a tie point. Doing this on each image will allow much better precision of selecting tie points.
    452453
    453454=== Selecting tie points ===