EUFAR10/06, flight day 231a/2010 Armsrace

[anch]

Data location: /users/rsg/arsf/workspace/EUFAR10_06-2010_231a_Armsrace

Data arrived from ARSF via SATA disk Q on 15/09/2010.

PI: Mate Stibranyi

Scientific objectives: N/A

Sensors:

• Eagle (25/02/2011)
• Hawk (25/02/2011)
• Leica LIDAR (Requested by PI)
• Digital Photography (Requested by PI)

[anch]

Please note that this project is stored in the archive-overflow directory until space becomes available.

[knpa]

Appears to be an issue with the bandset labels in the header files; they start at 900nm which is lower than it should be. Possibly incorrect bandset selected or none specified. Will leave this until end of the year and new Hawk calibration.

[emca]

Processed Applanix and IPAS

Starting Eagle and Camera processing

[emca]

Also going to do the Hawk processing

[emca]

Eagle and Hawk processing complete and ready for delivery check at
~airborne/workspace/EUFAR10_06-2010_231a_Armsrace/delivery/20110121

SCT values (and GPT) values for Eagle and Hawk lines:

Line no	Eagle	Hawk
1	-0.02	0.00
2	-0.06 (-0.09)	-0.01
3	0.04	0.00
4	-0.13 (-0.14)	0.00
5	0.04	0.00
6	-0.03	-0.03
7	-0.02	0.00
8	0.03	0.00
9	-0.08	0.00
10	0.02	0.00

Notes:
Eagle/Hawk line 10 was processed using -l 400 8491 in azspec as it contained a bend.

Hawk raw files are numbered incorrectly (do not match the logsheet).
Raw files SWIR*10* correspond to line 1
Raw files SWIR*1* correspond to line 2
Raw files SWIR*2* correspond to line 3
.... etc

Lines were processed to be consistent with the logsheet and the Eagle line numbering.

[anch]

Delivery checking hyperspectral

[anch]

Delivery check complete.

Everything looks fine, although there is some cloud over the beginning and end of some lines, which could be mentioned in the data quality section. This is most obvious on lines 7, 8, and 9.

[anch]

Starting LIDAR processing.

[emca]

Eagle and Hawk data sent to PI 25/02/2011