EUFAR11/03, flight day 095/2011, HYMEDECOS (erosion)

[knpa]

Data location: ~arsf/arsf_data/2011/flight_data/spain_portugal/EUFAR11_03-2011_095_HYMEDECOS_Erosion/

Data arrived from ARSF via network transfer on 19/04/11.

Scientific objective:
(1) to derive spatial information on vegetation, soil and terrain for hydrological model input by combined hyperspectral and
LiDAR data
(2) to conduct a spectral fingerprinting approach allowing to trace back sources and pathways of sediments. Airborne data
acquisition will be accompanied by an extensive field campaign

Priority: a4h

PI: H. Kaufmann

Sensors:

• Leica LIDAR Replacement (27/06/2011)

[emca]

Prcoessed the IPAS data - have created a folder on the workspace to put the data until the new directory structure has been finalised.

Going to start the LiDAR processing

[emca]

LiDAR processing complete - ready for delivery check at
~arsf/arsf_data/2011/flight_data/spain_portugal/EUFAR11_03-2011_095_HYMEDECOS_erosion/processing/delivery/EUFAR11_03-095-lidar-20110616

[iopa]

LiDAR delivery check ;

• this is a mountainous region and lidar-aster discontinuity reaches upto ~50m, is mostly within ~20m however, the peaks of this difference (at 50m) can show artifacts during the mapping stage with the provided mapper for hyperspectral data, resampling+interpolating the DEM to a resolution that reduces this sudden step between neighbour cells below 25m can improve/fix this
• if .tex is available could change EUFAR11_03 to EUFAR11/03 in first page of readme
• rename logsheet to have day in format 095
• could re-generated the logsheet for using the new bold format which looks nicer, with this command "generateLogsheet.py --renewtemplate -m auto -o processing/", it would mean re-entering the manual data but it doesn't look that much anyway

The data looks very good, nice work classifying those power cables.

[emca]

Updated readme & logsheet for above changes.
Mentioned DEM issue in readme, but perhaps the hyperspectral readme is a more appropriate place for this.

Data ready to deliver.

[emca]

LiDAR data sent to PI 27/06/2011