GB12_06, flight day 083b/2012, Diddington

[knpa]

Data location: /users/rsg/arsf/arsf_data/2012/flight_data/uk/GB12_06-2012_083b_Diddington/

Data arrived from ARSF via network transfer on 26/03/2012

GB12_06 Scientific objective:

GB12_06 Priority: 8

PI: Anthony Beck

Sensors:

Camera (26/04/2012)
Eagle (07/06/2012)
Hawk (07/06/2012)
LiDAR (07/06/2012)
FW LiDAR (25/06/2012)

[adbe]

Started navigation processing

[adbe]

Navigation processed

[adbe]

Processed RCD, RCD ready for delivery check.

[adbe]

Processing hyperspectral.

[emca]

Delivery check RCD. No problems with data.

The KML file contains the lidar as well as the Eagle/Hawk flightlines. The names for the lidar lines (less so for Eagle/Hawk) might seem a bit confusing to the PI, especially as they do not get a logsheet with the delivery. Is it worth changing the flight names to be the same as the delivered data format will be rather than the raw file name?

[adbe]

kml LiDAR have been renamed, for example LDR-...-01

[adbe]

Camera delivered to Anthony Beck on 26/04/2012 on disk 108.

[adbe]

Hyperspectral ready for delivery check

[emca]

Delivery checked the hyperspectral data

Line 06 has a gap in the data in both Eagle and Hawk (but in slightly different places). Need to mention in Readme doc

Readme name is different to what it lists in the readme as the readme name (Read_Me-20120515.pdf & Read_Me-20120517.pdf)

Otherwise ready to deliver

[emca]

Also for the level1/*mask-badpixelmethod.bil the files are all half what they should be according to the header file. Probably due to an incorrect data type in the header file.

[emca]

Upon further investigation the *mask-badpixelmethod bil and header files are correct (proj_tidy was giving an incorrect error message) so you can ignore the last comment.

[adbe]

Mentioned about gap in Eagle and Hawk. ReadMe name in contents changed to match name of file.

[adbe]

Processed LiDAR, LiDAR ready for delivery check.

[emca]

Delivery checked LiDAR data, no problems, ready to deliver.

[adbe]

Eagle, Hawk and LiDAR delivered to Anthony Beck on 07/06/2012 on disk 119.

[emca]

This flights included full waveform data which was not included in the original delivery - currently processing this data

[emca]

Full waveform lidar data sent to David Stott, Univ. of Leeds 25/06/2012

[knpa]

Beginning archiving.

[knpa]

Possible problem with the kml, holding off on archiving until mark1 is back.

[stgo]

Archiving
Starting archiving

[stgo]

Archiving
Starting upload to NEODC

[stgo]

Archiving
Upload complete

[dac]

Archiving

Raw data available from NEODC.

[asm]

JSON files - Lidar delivery

Problem with bng dem projection missing, solved using assign_projection.py -p '+proj=tmerc +lat_0=49 +lon_0=-2 +k=0.9996012717 +x_0=400000 +y_0=-100000 +ellps=airy +units=m +no_defs ' the_dem-bng.dem