GB12/05, flight day 290/2012, Brampton

[knpa]

Data location: /users/rsg/arsf/arsf_data/2012/flight_data/uk/GB12_05-2012_290_Brampton

Data arrived from ARSF via SATA disk on 19/10/2012

GB12/05 Scientific objective: unknown

GB12/05 Priority: a4m

PI: Ross Hill

Notes: FW LiDAR present

Sensors:

Camera (09/04/13)
Eagle (07/12/12)
Hawk (07/12/12)
LiDAR (07/12/12)
FW LiDAR (Requested)

[edfi]

finished navigation processing, created sol files incl. camera.

[knpa]

Beginning LiDAR processing.

knpa teaching edfi.

[edfi]

LiDAR classified, no vector data available. LiDAR delivery complete

[knpa]

Hyperspectral processing (knpa showing tipo)

[mark1]

Lidar delivery check completed - all looks ok.

[tipo]

Finished hyperspectral processing.

[edfi]

Beginning hyperspectral delivery check

[edfi]

ReadMe missing, DEM needs renaming to convention, check_apl_cmd not working could be similar to 249 (Luton) in that the hyp_genreadme_config file are not correct, in particular the file names do not match the naming convention.

Level 1 files look ok

Will look again when these have been adjusted

[tipo]

Fixed the above stuff and reprocessed for all bands

[edfi]

In flightlines/level1b which files are correct e290081b_n_sct-0.01.bil are correct or not needed? The same in line_information and navigation.

Just a versioning issue I think from multiple runs. Everything else looks fine

[tipo]

Removed the old files and renamed the newer ones to remove the _sct-0.01 bit

[edfi]

Hyperspectral check complete all now looks fine

[edfi]

Beginning Camera delivery check

[edfi]

LiDAR and Hyperspectral loaded onto HDD 142. Camera may be sent at a later date

[edfi]

LiDAR and Hyperspectral sent special delivery to PI (Ross Hill) 07/12/12

[tipo]

SCT values:

Line	Eagle	Hawk
1	-0.03	-0.06
2	-0.02	-0.07
3	-0.03	-0.06
4	-0.01	-0.06
5	-0.01	-0.06
6	-0.02	-0.06
7	-0.01	-0.06
8	-0.01	-0.06

[edfi]

Starting Vector check for LiDAR and Hyperspectral

[edfi]

Vector check complete. Total coverage of the area was not possible due to gaps in the data sent by OS. Readme updated. Ready for re-check

[anhi]

LiDAR Vector Delivery Check:

No problems

[anhi]

Hyperspectral vector check:

• gdal_translate example command in Readme needs correcting

[edfi]

Unzipping files to remake Readme

[edfi]

New ReadMe made and unzipped files removed

[anhi]

Readme checked no problems found.

[edfi]

Available RCD dispatched 09/04/13 - RCD suffered error during flight

[tipo]

Beginning archiving