GB12/05, flight day 075/2014, Monks Wood

[knpa]

Data location: /users/rsg/arsf/arsf_data/2014/flight_data/uk/GB12_05-2014_075_Monks_Wood/

Data arrived from ARSF via network transfer on 17/03/2014

GB12/05 Scientific objective: unknown

GB12/05 Priority: 8

PI: Ross Hill

Sensors:

Camera (Requested)
LiDAR (Requested), delivered 25/09/2014
FW LiDAR (Requested but lower priority), delivered 25/09/2014
Fenix (Requested)

[knpa]

There is a problem with the Fenix data, the .nav and .f98 files are blank.

From Tom:

Okay there was a problem with the Fenix PPS cable (bad solder joint) hence the reason that the .f98 and .nav files are empty. You will have to talk to Gary as we have been informed that there are enough ground control points on the Monks Wood site for the data to be corrected. Also the navigation data was collected and is there for the Fenix, it just wasn't included in the sensor generated files.

[tipo]

Started navigation processing.

[tipo]

Finished navigation processing, started RCD processing.

[tipo]

Started LiDAR processing.

[tipo]

Created hyperspectral delivery.

[tipo]

LiDAR has lines flown at different heights which need slightly different pitch and roll values.
High lines: p=0.00118716 r=-0.003968414

[stgo]

RCD D/c in progress

[stgo]

RCD d/c complete, no problems found. Will include in delivery this afternoon.

[stgo]

RCD data dispatched on 04/06/2014

[tipo]

LiDAR is taking a long time, as I'm having to find the roll error seperately for each line.

[tipo]

Higher altitude lines:

line	pitch	roll
150700	0.00113716	-0.00426684
151651	0.00113716	-0.00376841
152408	0.00113716	-0.00416841
153326	0.00113716	-0.00376841
153957	0.00108716	-0.00399841
154845	0.00108716	-0.00374841
155537	0.00108716	-0.00428414
160352	0.00108716	-0.00374841
161021	0.00118716	-0.00404841
165550	0.00118716	-0.00404841
164909	0.00118716	-0.00404841
164120	0.00118716	-0.00404841

The lower altitude lines are all:

0.00108716

-0.003968414

[tipo]

Lines 151651 and 154845 have areas where they narrow or taper off. The log shows that it was close to the maximum range gate, so its possible it moved slightly out of range, causing the gaps in the data.

[tec]

Beginning hyperspectral processing

[tec]

Hyperspectial processing has stoped due to lack of suitable darkframes. Speaking to ops to get data with an integration time of 20.000

Fenix data has integration times of

Int 1	Int2
20.0000	10.0000
29.3000	2.2000
25.0000	12.0000
30.0000	18.0000

[stgo]

Low altitude full waveform created.

[stgo]

High altitude waveform has been created. Lidar ready for delivery check.

[dap]

Beginning LiDAR delivery check.

[dap]

LiDAR Delivery Check
Complete. Issues found as follows:

• Contents page of readme does not have full waveform files listed.
• Link in "Data Details" section is a LAS 1.0 link, but LAS 1.2 data was processed.
• "Per flight line statistics" section is on next page from heading. I'd suggest you put the heading on the next page.
• HAWK data was collected, but typed up logsheet does not reflect this.
• Navigation directory is empty - should contain the .sol, .sup and .trj files.
• Flightline screenshots have ".txt.jpg" file extension - should be just .jpg.
• No vector screenshots - PI has not replied to knpa's email regarding this.
• Multiple LiDAR deliveries found in delivery directory - please delete one.
• Line 18 is oddly shaped - please comment on this in the data quality remarks.

• ASCII files should have had DOS line terminators - I've fixed this.

[stgo]

I've recreated the readme for the lidar delivery following the comments above.

The logsheet is at fault here, we can't have collected hawk data as the hawk instrument has not been installed in the plane. I think Ops meant the SWIR part of Fenix.

[dap]

LiDAR Delivery Check

Rechecking delivery.

[dap]

LiDAR Delivery Check
Completed. Issues found were:

• Two LiDAR delivery directories - please remove irrelevant one
• .sup file is missing from navigation directory
• Screenshots named incorrectly - the LDR need not precede the project code in the file names.
• .sol file is named incorrectly - the Julian day should be preceded by a '_' character, not '-'.

[dap]

LiDAR Delivery Check
Complete. proj_tidy complained at screenshot of each flightline - script should be updated to not do this.

LiDAR data ready for delivery.

[dap]

LiDAR data delivered to Dr Ross Hill, 25/09/2014.

[tec]

Archiving
Started

[dac]

Fenix

Ops have now collected darkframes - resuming processing.

[dac]

Fenix Processing

Found SCT values. Will process VNIR bands but can't deliver SWIR.

Line	SCT
-1	No data
-2	0.92
-3	1
-4	0.92
-5	0.96
-6	0.91
-7	0.95
-8	0.9
-9	1.84
-10	0.9
-11	0.99
-12	0.96
-13	1
-14	1.02
-15	0.93
-16	0.98
-17	1.01
-18	1.03
-19	0.94
-20	0.9
-21	0.96
-22	1.02
-23	0.96
-24	0.93
-25	0.94
-26	0.99
-27	1.05
-28	1.01
-29	0.93
-30	1
-31	0.9
-32	0.91
-33	1.02
-34	0.96

[dac]

Fenix Processing

Mapped all bands - creating delivery.

[dac]

Fenix Processing

Delivery created, splitting VNIR and SWIR bands.

[dac]

Fenix Processing

After checking, determined SWIR data is OK so will deliver. Ready for DC.

[lah]

Fenix DC

• line info & proj info xml files are missing.
• Have copied in missing logsheet and removed eagle & hawk pages (and renamed 075).
• renamed screenshots.
• check_bil_size reports: f075133b_mapped_osng.bil: BIL Filesize incorrect. Has correct no. bands and maps ok, so not sure what's wrong with it.
• under/overflows seem reasonable, but table goes off page. Readme needs recreating.
• scts look ok.
• spectra could do with double checking. SWIR seems rather high compared to VNIR. Our favourite spike is also present (bands 346-348 the cause).

Can't finish delivery check until xml files are created. Looking into fixing scripts.

[dac]

Fenix Processing

• Have generated line info and project info XML files.
• Tried reprocessing f075133b_mapped_osng.bil, still have error. Actual size 1559516964, calculated size 1558215740. Not sure why this is.
• Generated plots comparing to 6S simulated spectra, for some pixels looks OK for others SWIR is too high. Possibly integration time issue, will investigate further before sending.

[dac]

Fenix Processing

After more investigation determined SWIR is not usable (as originally though). Splitting off bands.

[dac]

Fenix Processing

• Removed SWIR bands and updated Readme
• Trimmed off additional bytes from end of f075133b_mapped_osng.bil
• Ready for DC

[gej]

Starting fenix delivery Check

[gej]

Fenix delivery check

• Since SWIR bands have been removed, we should remove SWIR overflows and underflows from read me
• f075333b_mapped_osng.bil is reporting incorrect filesize.

[dac]

Fenix Processing

• Have removed SWIR bands from readme.
• f075333b_mapped_osng.bil has lost most of the information from the header file. Needs to be recreated.

[asm]

Fenix Processing
-f075333b_mapped_osng.bi recreated, removed SWIR bands and replaced the .bil and .hdr files on delivery directory. Still complaining about size. I believe is the same error that f075133b_mapped_osng.bil and probably needs to be trimmed.

[asm]

Fenix Processing

-Flightline f075333b_mapped_osng.bil recreated a second time using apl and repleaced. Not complaining about size any more..

-In the process discover some missing info in the .hdr files. Corrected manually all *1b.bil.hdr

[asm]

Fenix Processing

-All .hdr files corrected. Should be ready to continue DC.

[gej]

Fenix Delivery Check

Everything okay now.
Zipping mapped files then ready to deliver

[gej]

Fenix Delivery Check

Mapped Files zipped
Ready for delivery

[dac]

Fenix Delivery

Dispatched Fenix data on USB hard drive to Ross Hill 15/09/2015

[dac]

Ross Hill confirmed receipt of hard drive (17/09/2015). Has mailed back.

[dac]

Archiving

Tidied up and started uploading to NEODC (running on gridmaster4).

[asm]

Archiving

Data is available from NEODC