Opened 3 years ago
Last modified 15 months ago
#685 new flight processing
Magic, flight day 235a/2021, Kiruna, Sweden
Reported by: | wja | Owned by: | |
---|---|---|---|
Priority: | immediate | Milestone: | |
Component: | Processing: general | Keywords: | |
Cc: | Other processors: |
Description (last modified by wja)
Data location: /users/rsg/arsf/arsf_data/2021/flight_data/sweden/Magic-2021_235a_Kiruna/
Data arrived from Kings College London via hardrive from Sweden on September 20th 2021.
Scientific objective: International project (includes NASA, CNRS, ESA, DLR, Eumetsat) to monitor and identify methane inventories in the arctic. JPL's HyTES instrument was utilised. A total of three aircraft were used to collect data, along with deployed balloons and ground measurments.
PI: Martin Wooster
Change History (14)
comment:1 Changed 3 years ago by wja
comment:2 Changed 3 years ago by wja
- Description modified (diff)
comment:3 Changed 3 years ago by wja
Navigation Processing
Navigation data for this flight is for the whole day. This includes flights 235a, 235b, 235c & 235d.
Single basestation method used. KIRU station downloaded from epncb.eu with the following:
lftp epncb.eu:/pub/ cd obs/2021/235 mirror --include-glob=KIRU* ./
RTX coordinates computed for KIRU:
- Horizontal sigma: 0.004 m
- Vertical sigma: 0.005 m
POSPac recommended cutting the following seconds from the begining and end of the flight (as the flight path goes over the KIRU station between data collection and take off / landing.
Current Start: 112733.000 Recommended Start: 113688.000 Current End: 126634.000 Recommended End: 125868.000
Horizontal RMSE generally below 3 cm. Start of flight and peaks up to 6 cm.
Vertical RMSE generally below 5 cm, several peaks up to 7 cm.
comment:4 Changed 3 years ago by wja
Hyperspectral Processing
All flightline processed with just 3 bands (RGB).
Data looks noisey.
comment:5 Changed 3 years ago by wja
Created Delivery
All bands processed. Delivery created.
comment:6 Changed 3 years ago by asm
Fenix DC
Started.
-No mosaic in Readme file
-No sensor files. Copied those to start running apl checks.
comment:7 Changed 3 years ago by asm
Fenix DC
There is a small offset between lines. It is minor but visible as there are not many features. Some lines do overlap better (7 and 8) and others is more obvious (5 and 6). This is likely due to the basestation and the DEM and I personally think it can be delivered but a note in the readme might be worth.
comment:8 Changed 3 years ago by asm
Fenix DC
-Very low signal and very noisy data (bining 2). The only bands with no underflows are between 70-225 (out of 594).
-Py6S: matching in the VNIR but much lower than expected. Clearly visible and nothing very usable in the SWIR.
-Please include note about noise and low ilumination in the readme
comment:9 Changed 2 years ago by wja
Delivery
Have added data quality note to the ReadMe.
comment:10 Changed 2 years ago by wja
Delivery
Finalised, put on FTP slot 5
comment:11 Changed 2 years ago by wja
Delivery Sent
PI notifified
comment:12 Changed 16 months ago by wja
Archiving
Created JSONs, committed them to database.
Ready to sync to CEDA.
comment:13 Changed 16 months ago by wja
Archiving
Started transfer to CEDA 14/09 16:00
comment:14 Changed 15 months ago by wja
Archiving
Transfer complete
Unpacking
run_unpacked_checks.py reports issues with nav times