Changes between Version 11 and Version 12 of Procedures/RCDPhotoProcessing/RawtoTif

Timestamp:

Jun 22, 2017, 11:16:26 AM (7 years ago)

Author:

dac

Comment:

Updated to remove Wine - doesn't work

Procedures/RCDPhotoProcessing/RawtoTif

@@ -1 @@
-Note this is currently not working under wine so all photo processing needs to be done on the windows box. For processing using the laptop see below. 
-
-= Processing the Raw RCD105 Images to Tiff =
+= Converting Raw RCD105 Images to Tiff =
 
 
- 1. Load the Leica photo processing software
-    * Under Windows, select start->programs->leica->calibration->Calibration Post Processing
-    * If using wine, run "leica_photo_processing" - currently only works as mggr.
+ 1. Open the Leica processing software (needs to run under Windows, normally on a virtual machine).
  1. Select the appropriate camera config (Parameters)
     * RCD with SN030 is the loan instrument from Leica used in 2015 from day 234 onwards, select parameter '''CH39_030_060_027_RGB_20100128''' ('''Please keep updated'''!)
@@ -18 +14 @@
     * Typically this will be something like ~arsf/arsf_data/2009/flight_data/iceland/IPY09_11-2009_219_Helheim/leica/rcd/proc_images
  1. Select 16 bit TIFF output ('''this is important! ''')
- 1. Hit the start button and go for coffee (allow about 20-30secs per file)
+ 1. Hit the start button and ~~go for coffee~~  continue with other work (allow about 20-30secs per file)
 
 Also it is possible to run more than one instance of the processing software, doing so on the windows machine will probably make it very slow but on a Windows VM with 2 processor cores assigned it runs quite happily.
@@ -26 +22 @@
 [[Image(wiki:Procedures/RCDPhotoProcessing:photo_processing_screenie.png)]]
 
-
-
-== Processing on the laptop ==
-
-The Leica photo processing can be used on the laptop as user arsf. To run the software type the following commands:
-
-* export WINEPREFIX=~/.wine_camera [[BR]]
-* cd ~/.wine_camera/drive_c/Program\ Files/Leica\ Geosystems/Calibration/ [[BR]]
-* ./PostProcessing.exe config/LeicaPostProcessing.cfg
-
-To set up for a different user copy the ~arsf/.wine_camera directory to /home/user and follow the instructions above. 
-
-