Changes between Version 44 and Version 45 of Procedures/RCDPhotoProcessing

Timestamp:

Dec 21, 2010, 10:30:06 AM (14 years ago)

Author:

mark1

Comment:

--

Procedures/RCDPhotoProcessing

@@ -21 +21 @@
 To improve the chances of this single script approach working, follow the stages below to set up the data and remove as many anomalies as possible.
 
-1. Process the IPAS data and create a SOL file
+1. Process the IPAS data and create a SOL file - Make sure to use the RCD camera lever arms not the LiDAR lever arms (and name the sol file appropriately so as not to get confused).
  1. Create a KML file and view it in Google Earth.
   * Check the rcd/logs file for an ***!ImageEvents1.csv file. There may be some empty files with this name so be sure to choose the correct one. If there are more then one then you need to specify which one to use. Run `kmlise_project.py -d <main_project_dir> -e main_project_dir/rcd/logs/***!ImageEvents1.csv > kml_file.kml` - this create a kml file using the !ImageEvents1.csv file