Changes between Version 14 and Version 15 of Processing/Applanix


Ignore:
Timestamp:
Sep 19, 2007 5:13:22 PM (12 years ago)
Author:
mggr
Comment:

--

Legend:

Unmodified
Added
Removed
Modified
  • Processing/Applanix

    v14 v15  
    4646       1. (mggr needs to transcribe the rest from notes)
    4747   1. When happy you have the best you can, click ''Output -> Export to PosProc''.  Then save and exit POSGPS (goes back to POSPac)
    48    1. Run POSProc.
    49      1. Change the Proc. filename kernel to YYYYJJJ.
    50      1. Make sure "Post-Process GPS" is ticked - if it's not there, you didn't save the POSGPS output correctly!
    51      1. Click the Subsystem setup button and enter the reference -> IMU (not general?) lever arm offsets from the table below:
    52      1. Run the process - read the messages for errors again!
    53 
     48 1. Run POSProc.
     49   1. Change the Proc. filename kernel to YYYYJJJ.
     50   1. Make sure "Post-Process GPS" is ticked - if it's not there, you didn't save the POSGPS output correctly!
     51   1. Click the Subsystem setup button and enter the reference -> IMU (not general?) lever arm offsets from the table below:
     52   1. Run the process - read the messages for errors again!
     53 1. You should now have a sbet file in .../Proc/sbet_YYYYJJJ.out
     54 1. (optional) Output as ASCII - this isn't used for processing, but you might want to be able to look through the position estimates manually/programmatically
     55   1. Hit 'OUTPUT', hit 'ok' (or hit XYZ button)
     56   
    5457
    5558--------------