Changes between Version 15 and Version 16 of Processing/Applanix


Ignore:
Timestamp:
Sep 19, 2007 5:15:54 PM (12 years ago)
Author:
mggr
Comment:

--

Legend:

Unmodified
Added
Removed
Modified
  • Processing/Applanix

    v15 v16  
    5151   1. Click the Subsystem setup button and enter the reference -> IMU (not general?) lever arm offsets from the table below:
    5252   1. Run the process - read the messages for errors again!
    53  1. You should now have a sbet file in .../Proc/sbet_YYYYJJJ.out
    54  1. (optional) Output as ASCII - this isn't used for processing, but you might want to be able to look through the position estimates manually/programmatically
     53 1. You should now have a sbet file in .../Proc/sbet_YYYYJJJ.out - this is what's needed for processing
     54 1. Save project and exit POSPAC
     55
     56
     57=== Optional extras ===
     58
     59Output as ASCII - this isn't used for processing, but you might want to be able to look through the position estimates manually/programmatically
    5560   1. Hit 'OUTPUT', hit 'ok' (or hit XYZ button)
    56    
     61
     62View the trajectory
    5763
    5864--------------