Changes between Version 19 and Version 20 of Processing/LeicaProcedure

Timestamp:

Feb 11, 2011, 12:40:34 PM (13 years ago)

Author:

knpa

Comment:

--

Processing/LeicaProcedure

@@ -18 +18 @@
 After running the ALSPP check the % of first returns column in the main window. This should be high (probably >95%). If not then it may be an indicator to problems with the data (such as a large % of cloud coverage)
 
-=== Data QC and further processing ===
+=== Data QC ===
 
 [wiki:Processing/Lidarqcprocedure Full QC procedure].
 
-The final stages of the processing are to quality check the data and filter out noisy points. To do this we use the Terrasolid package within the Microstation CAD environment, and can be very time consuming.  See [wiki:Processing/TerrascanTips tips] on using Terrascan and also [wiki:Sensors/LeicaLIDAR/MashUp#QC here] for further notes from leica.
+The final stages of the processing are to quality check the data and filter out noisy points. This can be very time consuming.  See [wiki:Processing/TerrascanTips tips] on using Terrascan and also [wiki:Sensors/LeicaLIDAR/MashUp#QC here] for further notes from leica.
 
 The main steps will be:
@@ -31 +31 @@
  * if GCPs available then compare them against LIDAR
 
+
+'''Once QC is complete, you need to start creating the delivery. Instructions are [wiki:Procedures/DeliveryCreation/LIDAR here].'''
+
+
 === Processing Full Waveform Data ===
+
+If there is full waveform data with the project then follow the instructions below.
 
 Once the discrete data has been processed, use the same .reg file (with the corrected roll value) to process the full waveform data.