| | 33 | === Processing Full Waveform Data === |
| | 34 | |
| | 35 | Once the discrete data has been processed, use the same .reg file (with the corrected roll value) to process the full waveform data. |
| | 36 | |
| | 37 | Load the .reg file in ALSPP. Under Inputs> Waveform Processing check the box Process Waveform Data. Ensure the correct trigger delay values are entered - these should be populated from the calibrated reg file. |
| | 38 | |
| | 39 | Load in the !RawLaser data and select Run. |
| | 40 | |
| | 41 | If you get an error "Unable to open the waveform file in selected folder" ensure that the raw data folders are in the correct structure - !RawLaser & RawWFD (case sensitive). The full waveform files will be in the format ***_4.LAS. |
| | 42 | |
| | 43 | Once the data has been processed it can be viewed in !TerraScan. Details on this can be found [wiki:Processing/TScanFW here ] |
| | 44 | |
| | 45 | At the moment, there are no tools available to do any post-processing of the full waveform data. |
| | 46 | |
| | 47 | |
| | 48 | |