EUFAR10/01, flight day 233b/2010, Lake Balaton Peninsula

[anch]

Data Location: ~arsf/workspace/EUFAR10_01-2010_233b_Lake_Balaton_Peninsula

Data arrived from ARSF via SATA disk Q on 15/09/2010.

Scientific objective: Mapping of species composition and stand health of shore vegetation, mapping of shore elevation and inundation structure.

This collection will also be used for EUFAR10-07.
Scientific Objective: High accuracy land use/land cover mapping, forest type mapping and invasive shrub species location

Priority: a4h

PI: A.Zlinszky

Sensors:

• Eagle
• Hawk
• Leica LIDAR
• Digital Photography

[anch]

Please note this project is in archive-overflow until space becomes available.

[emca]

The raw camera images were duplicated in EU10/03 233a, so were processed along with that project. I have moved the processed images relevant to this project to ..../leica/rcd/proc_images

[knpa]

added scientific objective

[knpa]

This flight is also for EUFAR10-07

[knpa]

Appears to be an issue with the bandset labels in the header files; they start at 900nm which is lower than it should be. Possibly incorrect bandset selected or none specified. Will leave this until end of the year and new Hawk calibration.

[benj]

Generated run scripts, ran processing and identified a couple of Eagle offsets as part of processing demonstration to PI. SCT offsets found:

Eagle line 1: 0.03s
Eagle line 2: 0.04s

[anch]

IPAS processing completed

[anch]

Starting LIDAR and camera processing.

[anch]

Camera submitted for delivery check

[knpa]

Starting delivery check.

[knpa]

Finished delivery check.

All looks good apart from:

• Flight letter (b) should be in name of photographs/thumbnails/eventfile, also filenames inside eventfile

• kml missing! -need to get me/someone to check this after you make it/find it

• In example exiftool in Readme, directory location goes off the right-hand side of the pdf. Should probably replace with one from a file with a simpler location (check with someone else before you bother doing this)

• tiff tag image descriptions do not give sortie flight letter. You can fix these with exiftool, probably needs to be done.

[anch]

Submitted lidar for delivery check

[knpa]

Taking delivery check.

[knpa]

LIDAR delivery check completed. The following changes need to be made before this project can be delivered:

• Logsheet name is in incorrect format - match it against the wiki
• dem name has incorrect format
• both screenshots have incorrect name format
• kml has the wrong name format
• Readme DEM section: "LIDAR data which has been gridded at 5 2 mere pixels". Which one is it? ;)
• Can not load all lines into lag at once. Error: "No points loaded from file, either because of a lack of points or because points lie outside quadtree boundary (possibly because of fence). Please check file." Not sure if this a problem with lag or lines themselves, they seem to load fine individually. Can you have a look a this, when fixed get someone to check lines again.

[anch]

Updated names to match wiki (Not sure about which kml file you mean...)

The ASCII images were used to generate the DEM, and intensity image and given they load individually into LAG we can assume they are correct.

Readme also updated - must have been an issue with the readme generation script which I'll look into tomorrow - hopefully hasn't effected my other LIDAR deliveries.

[anch]

Removing camera delivery and reprocessing images to tif so they can be tagged with new event file.

[iopa]

Taking hyperspectral.

[anch]

Camera ready for checking at:

/users/rsg/arsf/workspace/EUFAR10_01-2010_233b_Lake_Balaton_Peninsula/delivery/20110303/EUFAR10_01

[iopa]

Checking camera.

[iopa]

Camera check complete;

data and delivery seem fine and ready to go.

[knpa]

Fixed PI name misspelling.