UR10/01, flight day 258/2010, Iceland

[anch]

Data location: /data/okhotsk1/scratch/arsf/archive-overflow/UR10_01-2010_258_Iceland

Data arrived from ARSF via SATA disk DAPHNE 03 on 7/10/2010

Scientific objective: Not known

Priority: A5

PI: M. Kirkbride

Sensors:

• Eagle: Delivered 30/11/2010
• Hawk Delivered 25/02/11
• Leica LIDAR: Delivered 30/11/2010
• Digital Photography: Delivered 30/11/2010

[anch]

This data is currently held in archive overflow and will need to be moved as space becomes available

[iopa]

Taking camera.

[anch]

Applanix and IPAS navigation processing have been done for this project.

Taking hyperspectral.

[knpa]

Appears to be an issue with the bandset labels in the header files; they start at 900nm which is lower than it should be. Possibly incorrect bandset selected or none specified. Will leave this until end of the year and new Hawk calibration.

[iopa]

Camera is ready for checking.

Images removed as part of initial testing(.raw);
1-11
Images removed due to cloud/over-exposure/partial images(.raw);
211,297,424-440,473,474,524-527,539,758-762,781-783,787-790

[knpa]

Doing Camera delivery check.

[anch]

SCT Offsets

[anch]

Hyperspectral ready for delivery check.

[knpa]

Camera delivery check complete. Everything looks fine but PI in readme is C. Cockell which disagrees with this ticket and status spreadsheet (M Kirkbride) . Need to confirm correct PI, check application form and gloucester.

[knpa]

Beginning Eagle delivery check.

[knpa]

Delivery check completed.

All looks fine apart from following points:

• dem is just a symbolic link, need to copy actual file
• dem name in example azgcorr command should match name of dem file
• Shouldn't be any misc directory as geoid-spheroid is not needed for ASTER dems. Should also remove mention of this from readme contents and example azgcorr command.
• Significant cloud in a number of flightlines, should probably mention this in the data quality part of readme

[anch]

Errors with delivery have been corrected

[anch]

LiDAR has some gaps at high altitude (Possibly due to cloud/steam over the caldera).

I'm waiting on the results of Kevin's investigation into the same problem on flight day 259b before continuing the classification.

[knpa]

Phone call from Phil:

This is an issue with the range gate; the plane was flying lower than intended relative to the ground due to an out of date DTM (the volcano had caused the terrain to rise).

Can't do anything about these gaps, can resume processing.

[anch]

Eagle, LIDAR, and camera delivered

[anch]

Starting Hawk processing.

[anch]

Hawk submitted for delivery check

[emca]

Delivery checked Hawk data at
~airborne/workspace/UR10_01-2010_258_Iceland/delivery/20110111

Data all looks good.
Only thing is there is a flight letter on the logsheet (258a) but doesn't appear anywhere else so may just be a mistake on the logsheet. Otherwise ready to deliver.

[knpa]

Preparing Hawk to be delivered, putting on disk with HS from 259b

[knpa]

Hawk delivered to M. Kirkbride at Dundee (25/02/11)

[knpa]

Reprocessing HS with APL.

[knpa]

Stage 2 completed but line 22 E+H missing - APL claims they are not covered by nav file.

[knpa]

Fixed problem.

Re-running stage 2 as things got a bit confused.

Just for Eagle at this stage - still waiting for Hawk bad pixel stuff.

[knpa]

Re-running stage 2 (E+H) as apl chain has been updated to generate additional masked files.

[knpa]

Re-ran stage 2 for Hawk as aplcal has been updated in relation to the bad pixel file.

[knpa]

Stage 2 complete.

Had to change a couple of SCTs.

New correct values:

h4 -0.06
h22 1.58

[adbe]

Hyperspectral reprocessing delivery check:

• Should the bandlist for the example commands be ALL
• Screenshots are at the end of the ReadMe (remove [htb])
• Mention dropped scans in ReadMe

[knpa]

Moved screenshots to correct place in ReadMe.

Don't think example command bandlist should be ALL as fully mapped files are already provided.

There are no regular dropped scan lines so no need to mention in ReadMe.

PI has not requested that this project be delivered so reprocessing is finished.

[knpa]

Beginning archiving (of original processing)

[knpa]

r-syncing from workspace to repository.

[knpa]

There is tabi data present.

[knpa]

Finished preparing for archiving, made available to NEODC.

[knpa]

This was backed-up by NEODC and moved to archive disk a couple of months ago.

Deleting workspace version (original processing). Leaving ticket open for archiving reprocessing.