EM10/07, flight day 145a/2010, Trapani

[anch]

Specific Scientific Objectives

1. Development and validation of hyperspectral retrieval algorithms for biophysical parameter estimation in preparation for launch of PRISMA hyperspectral mission. These include;

Leaf area indexn (LAI m2/m2)
Fraction of vegetation cover (Fc, %)
Leaf chlorophyll concentration and canopy chlorophyll content.

2. Test and validation of remote sensing techniques for qualifying water exchanges in the main tree crop species of the Med.

PRIORITY:
a4l

Data location: /users/rsg/arsf/workspace/EM10_07-2010_145a_Trapani

Data arrived from ARSF via network transfer on 08/06/2010

PI: Dr F. Vuolo

NOTE: This project is actually over Catania rather than Trapani (the other end of Sicily).

Sensors:

• Eagle (16/02/2011)
• Hawk (16/02/2011)
• Leica LIDAR (04/01/12)
• RCD Photography (Not requested)

[anch]

Starting navigation processing

[anch]

Applanix, and IPAS processing have been completed.

ASTER DEM has been created and stored in ~arsf/dems/sicily/sicily_az.dem

Please note that the first flight line had a bad combined separation graph but after lots of tweaking this couldn't be resolved so this should not be used to correcting the roll offset for the LIDAR.

[anch]

Hyperspectral processing complete and delivery created. Submitted for delivery check

[knpa]

Beginning HS delivery check.

[knpa]

Delivery check completed.

All looks good apart from:

• Eagle lines 1 and 2 would not go through azgcorr due to turn. I think the large wobble sections for all flightlines need to removed from the level 1's using -l option in azspec.

• EM10_07-2010_145a_Trapani.dem should be EM10_07-2010-145a.dem

Need to mention the following in quality section of ReadMe:

• Overflows for lines e2, e9 due to dwellings
• regular dropped scan lines on most eagle lines and some hawk
• For hawk, bands 77 and 190 are always blank
• For hawk, the final two columns of band 1 are always blank

[anch]

Delivered Eagle and Hawk.

Sent to Dr. Vuolo in Austria and Dr. Dash in Southampton

[knpa]

Beginning LiDAR processing.

[knpa]

NOTE: This project is actually over Catania rather than Trapani (the other end of Sicily).
As we've already made a delivery on this, I will leave the title of project alone.

[knpa]

LiDAR looks good, v small horizontal and vertical offsets and no roll detected.

[knpa]

Creating LiDAR delivery.

[knpa]

LiDAR ready for delivery check at: ~airborne/workspace/EM10_07-2010_145a_Trapani/delivery/20111219/EM10_07

[adbe]

Started delivery check

[adbe]

LiDAR delivery check:

• No problems

Ready to deliver.

[knpa]

Just noticed that this project has RCD data which is not recorded on the status page.
Can not add it right now due to bug, this will need to be done, and the RCD processed, before this project is archived.

[knpa]

Bug has been fixed (thanks mggr), RCD added to status page.

[knpa]

LiDAR data delivered today to Francesco Vuolo at BOKU in Vienna (04/01/12)

[adbe]

Started RCD processing

[knpa]

Starting reprocessing of hyperspectral.

[knpa]

Stage 1 complete.

Stage 2 completed but lev3 for line 1 E+H can not be generated, apl is claiming the nav file does cover them.

[knpa]

Fixed problem. Generating missing eagle line.

[knpa]

Re-ran stage 2 for Hawk as aplcal has been updated in relation to the bad pixel file.

[knpa]

SCTs for line 1 did not appear to be correct, at least different ones were needed in this case.

Used values:
e1: 0.63 (0.685 old value)
h1: 1.48 (1.535 old value)

[adbe]

Reprocessed hyperspectral delivery check:

• EM10-07 should be EM10/07
• Julain Day of Flight: 145a
• Logsheet overview is of 145a and 145b. Are we generating new logsheets?
• Example command bandlist is 30 15 7, should probably be ALL
• Mention dropped scans in the ReadMe Dropped scans

[knpa]

• Fixed
• Fixed
• I think it's better to include the original ops typed-up logsheet
• I think it's better to include example bands, as we don't want to encourage users to create huge full band mapped files
• There are no regular dropped scan lines

This project does not need to be delivered, so this is finished.

[knpa]

Merged and deleted workspace version.

[dac]

Archiving

When tidying up ready for archiving found processed RCD images were available but not GPS tagged. Put into delivery structure with note they haven't been full processed but to contact us if this is needed.

[dac]

Archiving

Started uploading LiDAR, RCD, and raw data to NEODC.

[dac]

Archiving

Archived data available from NEODC: ​http://browse.ceda.ac.uk/browse/neodc/arsf/2010/EM10_07/EM10_07-2010_145a_Trapani

Marking as closed.