EUFAR11/06, flight day 098/2011, DELNVADER

[knpa]

Data location: ~arsf/arsf_data/2011/flight_data/spain_portugal/EUFAR11_06-2011_098_DELNVADER/

Data arrived from ARSF via network transfer on 19/04/11.

Scientific objective:
We want to combine hyperspectral and LiDAR data to detect the spread of the exotic tree Acacia longifolia that is an
"invasive engineer" in Portuguese dune ecosystems.

Priority: a4h

PI: A. Grosse-Stoltenberg

Sensors:

• Eagle (05/07/11)
• Hawk (05/07/11)
• Leica LIDAR Replacement (05/07/11)
• RCD (05/07/11)

[benj]

Downloaded RINEX data from PI for SCAC base station and put in rinex directory in repository.

[knpa]

Taking hyperspectral.

[anch]

Processing LiDAR.

IPAS has already been completed so going straight on to ALSPP

[anch]

Processing camera images from RAW to tif

[knpa]

Applanix data seems corrupted, all files after DCALM.016 are below size or zero byes. Also there are large gaps in the trajectory.

[anch]

Creating RCD thumbnails

[knpa]

Converted sol into sbet, will need to be processed with lever arms and boresight for honeywell IMU.

[knpa]

Eagle navigation is split over 4 files, these have been renamed:

096-11-1.nav: 098-11-0.nav (data is pre-flightlines)
098-11-1.nav: 098-11-1.nav
098-11-6.nav: 098-11-2.nav
098-11-7.nav: 098-11-3.nav

[knpa]

Eagle files 6+7 are the same line on the logsheet.

[knpa]

Hawk has one less file than Eagle. For the two file line (line 6 on logsheet), the first part is missing from the Hawk.

[anch]

Reprocessed IPAS with camera lever arm.

Saved in proc folder with _camera.sol suffix

[knpa]

SWIR098-11.1-11.hdr had an incorrect start time (00:00:00.000).
Have changed so is the same as Eagle and renamed the original file as SWIR098-11.1-11_old.hdr

[anch]

Camera awaiting delivery check

[iopa]

Checking camera.

[knpa]

Hyperspectral ready for delivery check at:

/users/rsg/airborne/2011_arsf_data/spain_portugal/EUFAR11_06-2011_098_DELNVADER/processing/delivery/EUFAR11_06-098-hyperspectral-20110621

[emca]

Delivery check for hyperspectral:

• Line 002 is missing from logsheet (its fallen off the bottom of page 4)
• Do we know what happened to Hawk line 6a other than its missing?
• DEM filename should include project code julday etc.
• File identifier table in readme shows line UL014 as h098278b instead of h098271b
• Sample aplcorr command uses e098011b_post_processed_nav.bil but file is e98011b_nav_post_processed.bil
• Update readme if not including apl user guide and for DEM name change

Data itself looks good. Ready to deliver once above changes are made.

[iopa]

Camera delivery check ;

data looks good and ready to deliver.

[knpa]

Above fixes made to hyperspectral delivery. Don't have anything to tell them about Hawk 6a except that there is no file for that part of the line, looks like there was instrument problems on this line.

HS ready to deliver.

[emca]

LiDAR delivery check:

Data all looks good.
There is no LiDAR data for line no_fcms - should mention this in readme.
Logsheet is missing a line (bottom of page 4). Should be able to copy the one from hyper spectral delivery instead of re-creating.

Otherwise ready to deliver.

[knpa]

Looks like there are some notes missing from this ticket for unknown reasons.

All data has been delivered according to the status page. It also says they were marked as such on 05/07/11.

[knpa]

Beginning archiving.

[knpa]

Created tarball, made available to NEODC.

Note that this is our largest project (1.1TB when unzipped) and so may take them a while.

[mark1]

Hyperspectral hawk bad pixel files and XML files have been re-created and re-delivered to PI (via email). This corrects sample number in bad pixel text files and Eagle IFOV value in XML and extra comments included.

[adbe]

Hyperspectral sct's

line	eagle	hawk
1	-0.03	-0.07
2	-0.06	-0.05
3	-0.01	-0.03
4	-0.01	-0.04
5	-0.06	-0.07
6a	2.08	MISSING
6b	-0.03	2.08
7	-0.02	-0.07
8	-0.05	-0.08
9	-0.03	-0.07
10	-0.05	-0.08
11	1.24	1.14
12	-0.03	-0.08
13	-0.03	-0.09
14	-0.07	-0.06
15	-0.02	-0.02
16	0.00	1.56
17	-0.04	-0.08
18	-0.05	-0.09
19	-0.07	-0.04
20	0.01	-0.07
21	-0.03	-0.07
22	-0.02	-0.08
23	-0.03	-0.07
24	-0.04	-0.08
25	-0.08	-0.06
26	-0.03	-0.08
27	-0.06	0.60

[knpa]

Backed up by NEODC.

Moved to archive disk.

[mark1]

New DEM created for Lidar delivery (to increase cover for hyperspectral data processing) and ftp'ed to user. Added the new DEM to the EXISTING delivery and named *_redeliver*.

[asm]

Archiving

Mapped files were not present in the hyperspectral delivery. Created the mapped files and a new delivery in order to create as well JSON files for the EUFAR flight finder tool. New delivery and JSON files are being uploaded to CEDA (started on 15/01/2018).

[asm]

Archiving

Upload finished, CEDA notified on 18/01/2017.