IG13/12, flight day 205/2013, Langjokull

[knpa]

Data location: /users/rsg/arsf/arsf_data/2013/flight_data/greenland_iceland/IG13_12-2013_205_Langjokull

Data arrived from ARSF via SATA disk on 30/07/2013

IG13/12 Scientific objective: Recording ice elevation and developing a mass-balance model for icelandic glacier.

IG13/12 Priority: 8

PI: Ian Willis

Sensors:

Camera (Dispatched 28/13/2013)
Eagle (17/10/2013)
Hawk (17/10/2013)
LiDAR (20/09/2013)

[edfi]

Navigation complete

[edfi]

Made a start on all sensors

[edfi]

RCD Processing complete ready to d/c

[tipo]

Images 00114, 00115 and 00116 appear to be corrupted.

[edfi]

also 00227

[edfi]

Camera readme needs making but currently erroring due to a few lines being outside of hyperspectral boundary:

/processing/delivery/IG13_12-205-camera-20130814# create_latex_camera_readme_edited.py -f ../../cam_genreadme-airborne.cfg
Will write to default file.
WARNING: tagtype is empty
WARNING: qremarks is empty
/users/rsg/arsf/templates/delivery/readme/camera/camera_readme_template.txt
Searching for file: /data/sibuyan5/scratch/arsf/arsf_data/2013/flight_data/greenland_iceland/IG13_12-2013_205_Langjokull/processing/delivery/IG13_12-205-camera-20130814/IG13_12-2013_205.kml
Found it.
Lidar failed. Trying to use hyperspectral data to sort photos...
Error. Thumbnails have not been added correctly. Most likely cause is number of arguments on 'lines' in cfg file being incorrect. Review tex file or edit cfg file.
Error. Thumbnails have not been added correctly. Most likely cause is number of arguments on 'lines' in cfg file being incorrect. Review tex file or edit cfg file.
Cannot find image RCD105-IG13_12-2013205-00251.jpg in list of photos from kml file. Skipping - THIS IS AN ERROR!!!
Cannot find image RCD105-IG13_12-2013205-00252.jpg in list of photos from kml file. Skipping - THIS IS AN ERROR!!!
Unknown tif tagging type in parameter file: Edit your config file!

[edfi]

LiDAR delivery made, ready for D/C

[edfi]

Hyperspectral flightlines are long and therefore have created large files for assessing the scts (<1gb for each time solution). Have created reduced area samples to reduce file size.

[edfi]

Line Number	Eagle	Hawk
Line 1	0.03
Line 2	0.03	0.0
Line 3	0.05	-0.07
Line 4	-0.01	0.0
Line 5	-1	-0.05
Line 6	-0.01	0.0
Line 7	0.0	-0.07
Line 8	0.04	0.0
Line 9	0.05	0.0
Line 10	0.05	0.0
Line 11	0.05	-0.15
Line 12	0.05	0.0
Line 13	0.05	0.0
Line 14	0.05	-0.07

[edfi]

From the headers and the original logsheet it looks like the first flightline crashed halfway through. The second half is preserved as SWIR205-13-2.raw, with SWIR205-13-3.raw being the second flightline, and the first half is probably in SWIR205-13-1.raw, but as you say, there is no header file.

[edfi]

Auto Dark Lines error.

Attempting to used darklines from SWIR205-13-2.raw as replacement

[tipo]

Delivery checked LiDAR. No problems found.

[edfi]

LiDAR data sent to PI (20/09/2013)

[knpa]

Beginning HS delivery check.

[knpa]

Checked delivery

All looks fine except:

• No logsheet
• DEM name is incorrect - update this in ReadMe as well
• ReadMe tex file in delivery
• empty fodis directory - delete or fill
• Almost all of the Hawk lines have significant areas of underflow centred around bands 61, 140 and 235 - should mention this in ReadMe
• there are gaps in the [eagle] tiffs created with check_apl_command - if these occur in your data too, these should be mentioned. Had trouble opening the tiffs in gtviewer (I think too big) so couldn't check them all properly.

[edfi]

Adjustments made, ready for re-check

[edfi]

RCD ready to D/C

[tipo]

Checked RCD, no problems found.

[tipo]

RCD dispatched 20/10/2013