Opened 9 months ago
Last modified 6 weeks ago
#700 new flight processing
LiDAR and Ibis Test, flight day 230/2022, Alconbury
Reported by: | wja | Owned by: | |
---|---|---|---|
Priority: | immediate | Milestone: | |
Component: | Processing: general | Keywords: | |
Cc: | Other processors: |
Description
Received via hard drive 13/09/2022.
LWIR and MWIR frame sensors also flown.
Flight over Alconbury for boresight, then 6 lines recorded over Little Shelford, Cambridge (no LiDAR for this area).
Change History (10)
comment:1 Changed 9 months ago by wja
comment:2 Changed 6 months ago by mark1
Have renamed 1 IBIS flightline to standard format, IBIS230-22-1, for testing processing chain.
Also changed fps in hdr from 64.95 to 10.01.
comment:3 Changed 6 months ago by mark1
Renamed all IBIS using:
rename.sh test_after_repair_Boresight_Alconbury_2022-08-18_14-00-55 IBIS230-22-10
rename.sh test_after_repair_Boresight_Alconbury_2022-08-18_14-07-14 IBIS230-22-11
rename.sh test_after_repair_Boresight_Alconbury_2022-08-18_14-11-48 IBIS230-22-12
rename.sh test_after_repair_Boresight_Alconbury_2022-08-18_14-15-58 IBIS230-22-13
rename.sh test_after_repair_Boresight_Alconbury_2022-08-18_14-20-42 IBIS230-22-14
rename.sh test_after_repair_Boresight_Alconbury_2022-08-18_14-34-45 IBIS230-22-15
rename.sh test_after_repair_Boresight_Alconbury_2022-08-18_14-40-25 IBIS230-22-16
rename.sh test_after_repair_Boresight_Alconbury_2022-08-18_14-45-32 IBIS230-22-17
rename.sh test_after_repair_Boresight_Alconbury_2022-08-18_14-50-21 IBIS230-22-18
rename.sh test_after_repair_Boresight_Alconbury_2022-08-18_14-55-16 IBIS230-22-19
rename.sh test_after_repair_Boresight_Alconbury_2022-08-18_13-10-30 IBIS230-22-1
rename.sh test_after_repair_Boresight_Alconbury_2022-08-18_15-00-19 IBIS230-22-20
rename.sh test_after_repair_Boresight_Alconbury_2022-08-18_13-18-06 IBIS230-22-2
rename.sh test_after_repair_Boresight_Alconbury_2022-08-18_13-22-57 IBIS230-22-3
rename.sh test_after_repair_Boresight_Alconbury_2022-08-18_13-29-11 IBIS230-22-4
rename.sh test_after_repair_Boresight_Alconbury_2022-08-18_13-33-53 IBIS230-22-5
rename.sh test_after_repair_Boresight_Alconbury_2022-08-18_13-38-21 IBIS230-22-6
rename.sh test_after_repair_Boresight_Alconbury_2022-08-18_13-43-15 IBIS230-22-7
rename.sh test_after_repair_Boresight_Alconbury_2022-08-18_13-50-08 IBIS230-22-8
rename.sh test_after_repair_Boresight_Alconbury_2022-08-18_13-55-15 IBIS230-22-9
comment:4 Changed 7 weeks ago by wja
Updated project code for these LiDAR & IBIS test flights to GB22/02
comment:5 Changed 7 weeks ago by wja
IBIS Boresight
Processed with 3 bands. Starting boresight procedure.
Lines 1 - 14 are a boresight configuration over Alconbury. lines 15 - 20 are over Little Shelford.
comment:6 Changed 6 weeks ago by wja
IBIS Boresight
Don't have a suitable pair of heading lines, but have compared -1, 0 and +1 and 0 looks good.
Pitch | Roll | Yaw |
0.9 | 0.5 | 0 |
comment:7 Changed 6 weeks ago by wja
IBIS Processing
There appears to be a slight FPS error in lines 16 & 19.
Investigating.
comment:8 Changed 6 weeks ago by wja
IBIS Processing
FPS is slightly too high for lines 16 & 19. Have changed in the raw header files from 10 to 9 (SCT difference between start and end of flightline was +10% seconds) and it looks better.
comment:9 Changed 6 weeks ago by wja
IBIS Processing
Processing all bands
comment:10 Changed 6 weeks ago by wja
IBIS Processing
Have processed all bands and have applied a mask to the swath edge that is obstructed by the aircraft on one side.
Starting to make delivery and metadata.
Unpacking
Code for running QC needs updating for new sensors.