LiDAR and Ibis Test, flight day 231/2022, Wytham Woods

[wja]

Received via hard drive 13/09/2022.

LWIR and MWIR frame sensors also flown.

Flight over Wytham Woods and then Little Shelford (6 lines, without LiDAR).

Issue with Ibis reported from instrument operator: "Ibis frame rate issue: 65 FPS only sustainable on Interal Trigger Mode. Possible NavSync issue resultant".

[wja]

Unpacking

Code for running QC needs updating for new sensors.

[wja]

Updated project code to GB22/02

[wja]

Applanix (IBIS) navigation data processed

[wja]

Infratec

Farrer (KCL) gave wja two lines of Infratec data during the sensor calibration at Rothamsted in Feb 2022. These have been unpacked but please note this incomplete flight data.

[wja]

Infratec

Directories for three lines have been provided:

• 220819_140710_fire_line1_radcorr
• 220819_142042_fire_line4_radcorr
• 220819_143119_fire_line6_radcorr

However, lines 4 & 6 don't seem to have copied properly. The following error is encountered when unzipping:

Archive:  220819_142042_fire_line4_radcorr.zip                                                       
warning [220819_142042_fire_line4_radcorr.zip]:  552151206 extra bytes at beginning or within zipfile
  (attempting to process anyway)                                                                     
error [220819_142042_fire_line4_radcorr.zip]:  start of central directory not found;
  zipfile corrupt.                                                                                   
  (please check that you have transferred or created the zipfile in the
  appropriate BINARY mode and that you have compiled UnZip properly)