Opened 2 years ago
Last modified 17 months ago
#701 new flight processing
LiDAR and Ibis Test, flight day 231/2022, Wytham Woods
Reported by: | wja | Owned by: | |
---|---|---|---|
Priority: | immediate | Milestone: | |
Component: | Processing: general | Keywords: | |
Cc: | Other processors: |
Description
Received via hard drive 13/09/2022.
LWIR and MWIR frame sensors also flown.
Flight over Wytham Woods and then Little Shelford (6 lines, without LiDAR).
Issue with Ibis reported from instrument operator: "Ibis frame rate issue: 65 FPS only sustainable on Interal Trigger Mode. Possible NavSync issue resultant".
Change History (5)
comment:1 Changed 2 years ago by wja
comment:2 Changed 20 months ago by wja
Updated project code to GB22/02
comment:3 Changed 20 months ago by wja
Navigation data processed
comment:4 Changed 17 months ago by wja
Infratec
Farrer (KCL) gave wja two lines of Infratec data during the sensor calibration at Rothamsted in Feb 2022. These have been unpacked but please note this incomplete flight data.
comment:5 Changed 17 months ago by wja
Infratec
Directories for three lines have been provided:
- 220819_140710_fire_line1_radcorr
- 220819_142042_fire_line4_radcorr
- 220819_143119_fire_line6_radcorr
However, lines 4 & 6 don't seem to have copied properly. The following error is encountered when unzipping:
Archive: 220819_142042_fire_line4_radcorr.zip warning [220819_142042_fire_line4_radcorr.zip]: 552151206 extra bytes at beginning or within zipfile (attempting to process anyway) error [220819_142042_fire_line4_radcorr.zip]: start of central directory not found; zipfile corrupt. (please check that you have transferred or created the zipfile in the appropriate BINARY mode and that you have compiled UnZip properly)
Unpacking
Code for running QC needs updating for new sensors.